Showing all 19 results

Show sidebar
Aquor Stainless Steel Debris Cover for V1, V1+ Hydrants
Close

Stainless Steel Debris Cover – V1

$29.99
Replaces hydrant debris cover and wedge with heavy-duty brushed stainless steel. Can be replaced without shutting off water, simply remove the hydrant faceplate screws to install.
Close

Matte Black Stainless Debris Cover – V1

$39.99
Replaces hydrant debris cover and wedge with heavy-duty brushed stainless steel. Matte black titanium PVD coating provides a beautiful finish with added corrosion protection. Can be replaced without shutting water off, simply remove hydrant faceplate screws.
Close

Matte White Stainless Debris Cover – V1

$39.99
Replaces hydrant debris cover and wedge with heavy-duty brushed stainless steel. Matte white coating over stainless steel provides a beautiful finish with added corrosion protection. Can be replaced without shutting water off, simply remove hydrant faceplate screws.
Close

Stainless Steel Debris Cover – V2+

$34.99
Replaces hydrant debris cover and wedge with heavy-duty brushed stainless steel. Adjustable friction hinge. Simply remove hydrant faceplate screws to install, water does not need to be shut off for replacement.
Close

Matte Black Stainless Debris Cover – V2+

$44.99
Replaces hydrant debris cover and wedge with heavy-duty brushed stainless steel. Matte black PVD coating over stainless steel provides a beautiful finish with added corrosion protection. Adjustable friction hinge. Simply remove hydrant faceplate screws to install, water does not need to be shut off for replacement.
Close

Matte White Stainless Debris Cover – V2+

$44.99
Replaces hydrant debris cover and wedge with heavy-duty brushed stainless steel. Matte white coating over stainless steel provides a beautiful finish with added corrosion protection. Adjustable friction hinge. Simply remove hydrant faceplate screws to install, water does not need to be shut off for replacement.
Close

RV Plug Cover

$14.99
Heavy-duty EPDM plug cover for our RV City Water Inlet and Hydrant V1/V1+ series. Snug fit. Use it to seal out any dirt or debris from your Aquor valve. Doubles as a weatherproofing gasket between your hydrant's faceplate and mounting surface.
AQUOR Stainless Steel 1/2" 90 Elbow Inlet
Close

90° Elbow Inlet

$12.99
Replaces standard straight inlet with a 90° elbow. Shortens overall length of hydrant by 1/2". Includes stainless steel valve reset spring. Positionable. 316L stainless steel. Compatible with all Aquor hydrants and outlets except ground hydrants.

1/2″ PEX Crimp Inlet

$14.99
Connect Aquor hydrants to 1/2" PEX in seconds. Designed for use with 1/2" PEX tubing and crimp ring fittings. Slide your PEX line over the fitting, then clamp the crimp ring - achieving a permanent, water-tight seal. Compatible with all Aquor hydrants and outlets except Ground Hydrants.

1/2″ PEX Crimp Inlet, 90° Elbow

$14.99
Connect Aquor hydrants to 1/2" PEX in seconds. Designed for use with 1/2" PEX tubing and crimp ring fittings. Slide your PEX line over the fitting, then clamp the crimp ring - achieving a permanent, water-tight seal. This elbow inlet can be positioned in any direction due to unique O-ring seal. Tighten fully, then back off to desired placement (up to 360°, 1 rotation). Compatible with all Aquor hydrants and outlets except Ground Hydrants.
Aquor PEX Inlet Straight F1960
Close

1/2″ PEX Expansion Inlet

$14.99
Connect Aquor hydrants to 1/2" PEX in seconds. Designed for use with cold-expansion 1/2" PEX tubing. Expand your PEX line, then let it shrink on the fitting - achieving a permanent, air-tight pressure seal. Compatible with all Aquor hydrants and outlets except Ground Hydrants.  Specification Sheet
Aquor PEX Inlet - 90 elbow
Close

1/2″ PEX Expansion Inlet, 90° Elbow

$14.99
Connect Aquor hydrants to 1/2" PEX in seconds. Designed for use with cold-expansion 1/2" PEX tubing. Expand your PEX line, then let it shrink on the fitting - achieving a permanent, air-tight pressure seal. Elbow inlet can be positioned in any direction due to unique O-ring seal. Tighten fully, then back off to desired placement (up to 360°, 1 rotation). Compatible with all Aquor hydrants and outlets except Ground Hydrants.  Specification Sheet
Close

Double Female Hose Adapter, 3/4″ GHT

$19.99
Stainless steel double-female hose adapter. Use this handy item to connect two male garden hose ends together. It works great for our RV City Water Inlet, or any situation where Aquor hydrants are used as fill valves. Features:
  • 3/4" GHT x 3/4" GHT
  • 316L marine-grade stainless steel
  • EPDM gaskets


Stainless Steel Mounting Box for Aquor V1 Hydrant
Close

Stainless Steel Mounting Box – V1

$44.99$49.99
For new construction. For a faster & better-weatherproofed installation. 100% stainless steel will last decades. Welded edges and brushed finish. Can be used with liquid or tape flashing for additional protection. Includes machine screws.
Aquor Stainless Steel Mounting Box
Close

Stainless Steel Mounting Box – V2+

$44.99$49.99
For new construction. For a faster & better-weatherproofed installation. 100% stainless steel will last decades. Welded edges and brushed finish. Can be used with liquid or tape flashing for additional protection. Includes machine screws.
AQUOR Stainless Steel Mounting Plate
Close

Stainless Steel Mounting Plate – V1

$24.99
For retrofits. Great for brick and stucco, but can be used on many siding types. This trim plate extends the mounting screws further from the entry hole - perfect for crumbling masonry or covering larger entry holes. Includes machine screws.
AQUOR Stainless Steel Mounting Plate for V2+ Hydrants
Close

Stainless Steel Mounting Plate – V2+

$24.99
For retrofits. Great for brick and stucco, but can be used on many siding types. This trim plate extends the mounting screws further from the entry hole - perfect for crumbling masonry or covering larger entry holes. Includes machine screws.
Close

Teak Mounting Block – V1

$19.99
For new construction or retrofit. Genuine teak block. We have been using teak on our marine products for decades. Teak is a natural weatherproof and rot-resistant hardwood, and can be oiled, painted, or left unfinished. Weathers beautifully over time. 1" depth.
Close

Teak Mounting Block – V2+

$19.99
For new construction or retrofit. Genuine teak block. We have been using teak on our marine products for decades. Teak is a natural weatherproof and rot-resistant hardwood, and can be oiled, painted, or left unfinished. Weathers beautifully over time. 1" depth.